Reduction Device Product List and Ranking from 6 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

Reduction Device Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

  1. 藤崎商会 本社 Hiroshima//Building materials, supplies and fixtures manufacturers
  2. 松江土建 環境部 Shimane//Other construction industries
  3. トーメック Ibaraki//Building materials, supplies and fixtures manufacturers
  4. WEF技術開発 Shiga//Construction Consultant
  5. エクシン Osaka//Building materials, supplies and fixtures manufacturers
Go to Company Ranking

Reduction Device Product ranking

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

  1. Blast ultra-low frequency sound reduction device "TBI Resonator Type-F" 藤崎商会 本社
  2. [Aqua Mixer Introduction Case Study] Hydrogen Sulfide Countermeasures in Manufacturing Plants 松江土建 環境部
  3. Inverter Environmental Impact Reduction Device 'TMI-2250W/2150W' トーメック
  4. Report on Measures to Reduce Anaerobic Biological Treatment Gas Remaining (Dissolved) in Wastewater Discharge WEF技術開発
  5. 4 Nanochitapro Formaldehyde Concentration Reduction Test エクシン

Reduction Device Product List

1～7 item / All 7 items

Displayed results
[Aqua Mixer Introduction Case Study] Hydrogen Sulfide Countermeasures in Manufacturing Plants

[Aqua Mixer Introduction Case Study] Hydrogen Sulfide Countermeasures in Manufacturing Plants

Experience the high dissolution efficiency by using it before introduction! No issues such as clogging during operation.

We would like to introduce a case study of our "Aqua Mixer" implemented as a measure against hydrogen sulfide generated from metal cutting wastewater. Previously, we used aeration pipes, but clogging occurred during blower shutdowns, resulting in an anaerobic condition in the tank where hydrogen sulfide was generated. During the operation of this product, we were able to confirm the reduction effect of hydrogen sulfide in the gas phase, and no issues such as clogging occurred. [Case Overview] ■ Challenges - Although measures were taken with aeration pipes, clogging occurred during blower shutdowns. - The tank became anaerobic, leading to the generation of hydrogen sulfide. ■ Results - During the operation of this product, we confirmed the reduction effect of hydrogen sulfide in the gas phase. *For more details, please refer to the PDF document or feel free to contact us.

  • Water Treatment
  • Drainage and ventilation equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Inverter Environmental Impact Reduction Device 'TMI-2250W/2150W'

Inverter Environmental Impact Reduction Device 'TMI-2250W/2150W'

For CO2 reduction, black smoke measures, and noise control! With the installation of brakes, emergency braking and inching operations can be performed with millimeter precision.

The "TMI-2250W/2150W" is an inverter environmental impact reduction device compatible with general-purpose 210V large motors (90kW). It enables reduction in generator output and fuel consumption through harmonic countermeasures and power factor improvement. Suitable speed settings can be made according to construction methods and ground conditions (multi-stage settings and stepless speed variation are selectable). Additionally, this product features a motor temperature monitoring function using a temperature sensor. 【Features】 ■ Compatible with general-purpose 210V large motors (90kW) ■ Joystick adoption allows all operations to be controlled with a single lever (when multi-stage speed variation is selected) ■ Equipped with a motor temperature monitoring function using a temperature sensor ■ With the built-in brake, emergency braking and inching operations can be performed with millimeter precision ■ Capable of responding to voltage fluctuations in generators, allowing simultaneous use with other loads (130V to 280V, using dedicated software for augers) *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Report on Measures to Reduce Anaerobic Biological Treatment Gas Remaining (Dissolved) in Wastewater Discharge

Report on Measures to Reduce Anaerobic Biological Treatment Gas Remaining (Dissolved) in Wastewater Discharge

We will introduce a report on measures to reduce anaerobic biological treatment gas remaining (dissolved) in wastewater discharge.

Our company has promoted the oxidation of hydrogen sulfide gas through the supply of oxygen ultra-fine bubble (O2UFB) gas, aiming to reduce odors. This time, we selected oxygen UFB treatment as a measure against hydrogen sulfide gas, which has proven effective for us. In the test tank, the dissolved oxygen concentration in the hydrogen sulfide dissolved water rose immediately after the start of the test, confirming that the oxidation reaction proceeded very quickly. Under high-concentration oxygen water conditions, hydrogen sulfide gas loses hydrogen and chemically transforms into sulfur (sulfide), becoming odorless. [Test Results (Excerpt)] - Treated Water: Sample taken from anaerobic treated water (direct sampling) just before inflow into the discharge tank - Treated Water Volume: 500L (to confirm the reactivity relative to the target water volume) - Water Temperature: 32°C / Oxygen Saturation Concentration: 7.5mg/L - Dissolved Oxygen Concentration: 0.85mg/L / Anaerobic Condition *For more details, please refer to the PDF document or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Causes and Solutions for Fuel Economy Loss in Automobiles Due to Rolling Resistance

Causes and Solutions for Fuel Economy Loss in Automobiles Due to Rolling Resistance

Compensate for the rolling resistance, which is the source of torsional vibrations, and improve the fuel efficiency loss of the automobile.

Axial runout, or rotational axis vibration, can be described as a complex vibration due to centrifugal force causing radial vibrations, torsional vibrations from rotational friction, axial compressive vibrations, and deflection vibrations. This is because the rolling resistance acting on the tire is a "random phenomenon where both the magnitude and direction of the force change constantly over time." By using our patented technology to prevent axial runout, depending on the driving conditions that affect the differences in rolling resistance, we should be able to offset the tire's rolling resistance and save a significant portion of these fuel economy losses. 【Features】 ■ Offsets tire rolling resistance ■ Saves a significant portion of fuel economy losses *For more details, please refer to the PDF materials or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Blast ultra-low frequency sound reduction device "TBI Resonator Type-F"

Blast ultra-low frequency sound reduction device "TBI Resonator Type-F"

Achieve tunnel blasting without rattling or pressure! This is a soundproof material that reduces the generated ultra-low frequency noise. *NETIS registered product

The "TBI Resonator Type-F" is a soundproofing material that effectively eliminates prominent ultra-low frequency sounds such as 4Hz and 8Hz, which are generated by blasting, by utilizing the phenomenon of sound wave resonance. Ultra-low frequency sounds (sound waves below 20Hz) generated by tunnel blasting can cause complaints by rattling the fixtures of nearby houses and creating a sense of pressure on the human body. By combining the "TBI Resonator Type-F" with the "TBI Soundproof Door Type-F," we achieve tunnel blasting without rattling or pressure sensations. 【Features】 ■ Effectively eliminates prominent ultra-low frequency sounds such as 4Hz and 8Hz generated by blasting. ■ By combining with the "TBI Soundproof Door Type-F," we achieve tunnel blasting without rattling or pressure sensations. *For more details, please refer to the PDF document or feel free to contact us.

  • サブ1.jpeg
  • Tunnel Materials
  • Tunnel construction
  • Soundproofing panels

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nanochitapro Formaldehyde Concentration Reduction Test

Nanochitapro Formaldehyde Concentration Reduction Test

Causing substances of sick house syndrome. Formaldehyde at 100 ppm decreases to 15 ppm after 24 hours!

Formaldehyde is a causative substance of sick house syndrome. It is found in furniture, building materials, adhesives for wallpaper, paints, and is also used as a preservative. At Exin, we used a titanium dioxide nanoparticle dispersion "nanotita pro" to conduct tests on the reduction of formaldehyde concentration and the generation of carbon dioxide through the decomposition of formaldehyde. The PDF document below includes the test conditions and results. Please feel free to download and review it. 【Formaldehyde Concentration Reduction Test (Notes)】 ■Sample size: 20cm × 20cm Exposure area: 400cm2 ■Test container: 5-liter Tedlar bag ■Gas amount in the container: Formaldehyde 100ppm ■Test room temperature: 20℃ ■Control test: Conducted similarly without the sample *For more details, please refer to the PDF document or feel free to contact us.

  • Safety and consumables
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.